Plastic HDT Vicat Testing Machine , Digital HDT Heat Distortion Vicat Softening Point Apparatus

Plastic HDT Vicat tTesting Machine , Digital HDT Heat Distortion Vicat Softening Point Tester , HDT Vicat Measurements

Application:

It is mainly used for the determination of heat distortion temperature and Vicat softening point temperature of non-metallic materials such as plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting laminates. It is easy to operate and precise in control. It is a highly intelligent test instrument widely used in colleges and universities, research institutes and product quality supervision and inspection units.

It adopts PC control, digital display dial gauge to measure deformation, real-time curve drawing, and the test data is processed twice directly on the PC. The test data can be imported into the OFFICE software for editing and layout.

Standards:

GB/T 1633,GB/T 1634,GB/T 8802,ISO 2507,ISO 75,ISO 306,ASTMD 1525,ASTMD 648

Specification:

1) Temperature control range: room temperature to 300 ° C

2) Maximum temperature error: ±0.5°C

3) Heating rate: 50 ° C / h, 120 ° C / h

4) Temperature measurement point: 1

5) Deformation measurement range: -0.1mm~1.1mm

6) Maximum deformation error: ±0.01mm

7) Using medium: methyl silicone oil or transformer oil;

8) Sample support span: 64mm, 100mm

9) Cooling method: natural cooling above 150 °C, water cooling below 150 °C or natural cooling;

10) Has an upper limit temperature protection function;

11) Number of test stands: 3

12) The control mode adopts the single-chip computer and PC distributed control system;

13) Instrument size: 490mm × 580mm × 1400mm

14) Space required: 1m front and back, 0.6m left and right

15) Power supply: 4500VA 220VAC 50HZ

Configuration:

1) 1 x Host one

2) 3 x Sample holder

3) 3 x Hot deformation heads

4) 3 x Vicat pinion

5) 1 x Brand desktop computer

6) 1 x Color inkjet printer

7) 1 x Power cord

8) 1 x Signal line

Note: Users need to have cooling water source and ventilation smoke exhaust equipment.