Product Details:
Payment & Shipping Terms:
|
Barrel Parameters: | Inner Hole 9.55±0.025mm | Power: | AC220V±10% 50/60Hz |
---|---|---|---|
Temperature Uniformity: | ±0.5℃ | Testing Before Delivery: | Yes |
After-sale Customer Service: | Yes | Product Name: | Melt Flow Index Tester |
High Light: | plastic testing equipment,plastic pipe testing equipment |
Digital Melt Flow Index Tester for Plastic , Melt Flow Indexer
Digital Melt Flow Index Tester for Plastic is used for measuring a variety of plastics, resins during viscous flow condition under a certain temperature and load, to get MFR value per 10min by standard die melt flow rate. It applies to the higher melting temperature of polycarbonate, aromatic sulfone, fluoro plastic, nylon and other engineering plastics, and also used in the plastic test for polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), polycarbonate (PC) resin and of lower melting temperature, which is widely used in plastics, plastic products, petrochemical industry and related universities, research institutes, and commodity inspection departments.
Technical parameters:
Machine size(W*H*D) | 250*510*350mm |
Power | AC220V±10% 50/60HZ |
Barrel parameters | Inner hole 9.55±0.025mm |
Pistons parameters | Piston head: 9.475±0.015mm |
Piston length | H=6.35±0.1mm |
Parameters | Extrusion hole 1=2.095±0.005mm |
Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
Temperature range | RT~450ºC |
Temperature accuracy blade to jawand dust collector |
±0.2 ºC |
Display resolution | 0.1ºC |
Maximum comsuption | < 600W |
Temperature recovery time | less than 4 min. |
Weight parameters | |
Weight accuracy | ±0.5% |
Basic configuration | 0.325kg, 1.kg, 2.1kg, 3.kg, 5.kg, 10.0kg, 12.kg, 21.6kg |
Position detection | |
Loop distance from up and down | 30mm |
Control precision | ± 0.1mm |
Test flow control | |
Times of cutting the material | 0~10 times |
Material cutting interval | 0~999s(set reference Table 2) |
Control flow reaches the set temperature without volatility | |
Barrel temperature time | 15 min. |
Material be installed | 1 min |
Material sample temperature recovery time | 4 min. |
When binder set | 1min |
Contact Person: Mrs. Julie Zhong
Tel: 86-13267004347
Fax: 86-769-2318-1253
DH - 300 Density Meter Plastic Granules AC 100V - 240V For PVC / PE Material
High Precision Digital Density Meter Constant Temperature Liquid Densimeter
Electronic Gold Purity Tester Digital Density Meter Gold Karat Purity Analyzer
Solid Liquid Powder Specific Gravity Meter , Chemical Density Measurement Device
Electronic Mechanical PC Control Tensile Compression Testing Machine
High Quality Hydraulic Pump Testing Machine , Universal Hydraulic Testing Machine 1000KN
Tensile Universal Testing Machine / Strength Testing Machine For Leather Rubber Plastic
WDW-2 Elongation Testing Machine / Single Column Wire Elongation Tester
High Precision Automatic Melt Flow Index Tester For Measuring Melt Mass Flow Rate
Digital Plastic Izod And Charp Pendulum Impact Tester Computer Controlled
Digital Cantilever and Simple Plastic Testing Machine / Beam Izod Impact Strength Tester
Computer Controlled HDT / Vicat Softening Point Apparatus Heat Distortion Testing Machine