IEC60695 -11-5 GB/T 5169.5-2008 Needle Flame Test Apparatus For Engineering Plastics

IEC60695 -11-5 GB/T 5169.5-2008 Needle Flame Test Apparatus For Engineering Plastics

Model: HT-5169T-N

Application:

Electrical and electronic products due to the use of the process of failure: such as electronic components or electronic parts of the poor contact with overload, fault current and other reasons, it may cause a fire, this instrument is to simulate the electrical and electronic products in the fault conditions under the fire caused by a small flame, come Evaluate the danger of electrical and electronic products catching fire.

Standards:

IEC 60695-2-2: 1991 (Second Edition), Amendment No. 1 of IEC 60695-2-2 (1994-03), IEC60695 -11-5, GB/T 5169.5-2008, GB4706.1-2005 The simulated test project specified by the standard.

Specification:

1. Needle burner: inner hole Φ 0.5mm ± 0.1mm, outer diameter ≤Φ 0.9mm, length ≥ 35mm, stainless steel

2. Burner angle: tilt 45 ° (test) or vertical (when adjusting the flame height)

3. Burning time: 0-999.9s ± 0.1s adjustable (usually 30s)

4. Holding time: 0-999.9s ± 0.1s, automatic recording, manual suspension

5. Flame height: 12mm ± 1mm (with height measuring instruments)

6. The gas body: 95% butane gas (can use bottled lighter gas)

7. Temperature test range: 0~1000 °C

8. Flame temperature requirements: from 100 ° C ± 2 ° C to 700 ° C ± 3 ° C time within 23.5 seconds ± 1 second

9. Temperature thermocouple: Φ0.5mm imported armored (K type) thermocouple

10. Needle flame burning tester test background: black background

11. Test process: automatic control of test procedures, independent ventilation

12. Reference standard: IEC60695 -11-5, GB/T5169.5-2008, GB4706.1-2005

13. The studio volume: 0.5 cubic (can be customized according to customer requirements 0.75 cubic or 1 cubic)

14. The outer dimensions of the equipment: 1000mm wide × 650mm deep × 1300mm high