|Place of Origin:||Dongguan China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||standard exporting package|
|Delivery Time:||5-8 Work Days|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||800 sets per month|
|Name:||Die Cutting Machine For Plastic Cutter||Load:||1000KG|
|Platen Diameter:||About 20 Kg.||Machine Size:||280X330X430mm.|
|Base Plate:||230X250mm||Effective Height:||100mm.|
1000KG Load Pneumatic Cutting Machine,
Dia 120mm Platen Pneumatic Cutting Machine,
230X250mm base plate pneumatic cutter
New Pneumatic Slicer Pneumatic Automatic Slicer Electric Pneumatic Cutting Machine
The pneumatic slicer is mainly used for rubber cutting standard test pieces, and it is necessary to match the standard knife die to connect the gas source above 4KG. Mode of operation: For safety, press the manual pressure valve with both hands.
|Platen diameter||Ф120 mm|
|Machine weight||about 20 kg.|
1. Place the machine on a flat surface, adjust the four feet to make it stable.and put the cutting glue.
2. Open the ventilation source, adjust the rear oil-water separator valve switch, adjust the barometer to at least 4KG.
3. Put the PU glue, put the film on the glue, then put the knife mold, then hold the red button switch at the same time with both hands (for safety, both hands must be pressed at the same time), press the plate down on the knife mold, stay for a few seconds, so that the rubber is fully cut off, and at the same time let go, take out the test piece.
4. When you are finished, please turn off the air supply.
Contact Person: Vicky He