Plastic Moulds Vicat Test Automatic Vicat Apparatus Equipment
This machine is a non-metallic material testing instrument designed and manufactured according to the latest international standards and national standards. It is mainly used for non-metal such as plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting laminates. Determination of the heat distortion temperature of the material and the Vicat softening point temperature. It is easy to operate and precise in control. It is a highly intelligent test instrument widely used in colleges and universities, research institutes and product quality supervision and inspection units. It adopts single-chip control, PID phase-modulated output, with upper limit temperature setting, and automatically stops heating when the test temperature reaches the upper limit temperature.
1) 1 x Host
2) 3 x Sample holder
3) 3 x Hot deformation heads
4) 3 x Vicat pinion
5) 1 x Electric control box
6) 3 x Digital display dial gauge
8) 1 x Signal line
9) 1 x Screw screwdriver
10) 1 x Weight set
Remarks: Users need to have cooling water source and ventilation smoke exhaust equipment
Standards:GB/T 1633, GB/T 8802, GB/T 1634, ISO 2507, ISO 75, ISO 306, ASTM D 1525, ASTM D 648.
1) Temperature control range: room temperature to 300 ° C;
2) Heating rate: 120 ° C / h, 50 ° C / h;
3) Maximum temperature error: ±0.5 °C;
4) Temperature measurement point: 1;
5) number of sample racks: 3;
6) Deformation measuring gauge: digital display dial gauge;
7) Deformation measurement range: 0 ~ 1.1mm;
8) Sample support span: 64mm, 100mm;
9) Maximum deformation measurement error: 0.01mm;
10) Heating medium: methyl silicone oil; (prepared by customers)
11) Cooling method: natural cooling above 150 °C, water cooling below 150 °C or natural cooling;
12) Instrument size: 810mm × 470mm × 780mm
13) Space required: 0.5m front and back, 1.5m left and right
14) Power: 2500VA 220VAC 50HZ
We guarantee this instrument for one year and life-long maintenance.
We will be responsible for fixing or replacing the instrument if quality issue was arisen,the service is excluding if the machine is breakdown caused by following reasons:
(1) Wrong operation;
(2) Fixed or refitted personally;
(3) The machine itself is not the reason caused breakdown;
(4)Applying the machine under the serious conditions.such as high
temperature,moist, corrosive gas,or vibration.
(5)Move or transportation as soon as installed.
(6)Consumables and easy-loss components.
a.If errors occur,please refer to the troubleshooting tips of the instruction manual.
b.Please contact with our after-sales service department or distribute in time if can’t clear fault.
c.DahoMeter after-sales hot line 400 830 0646
We ill choose the best way to ship the items ASAP
4.Are we manufacturer made copy product or original product?
We are the original manufacturer for density tester,DahoMeter and Quarrz is our own brand.the model starts with DH,or AU,or KS is belongs to us generally.
5.Why choose us
We deep understood what's you need is not only product,but also all-around service support,especially for technical instruction and after-sales service.
a.We have been specialized in this field for almost 13 years.
b.Professional researching and technology team.
c.Customer service team.